Elevator Belts

Products

Elevator Belts

We provide a wide range of industrial elevator belts, which is highly acclaimed for its excellent performance. We have carved a niche as the most prominent elevator belts manufacturer, based in India. Bucket elevator belts are designed for inclined conveyors of material by, fixing metal slots or buckets on the carrying surface of the belt at regular intervals. These rubber elevator belts are offered in 34oz hard duck cotton and in nylon as well. We deliver these belts within the stipulated time frame and that too at very affordable price.

Proper Belt Width

For buckets up to 16" wide (400mm), the belt should be at least 1" (25mm) wider than the buckets.

For buckets wider than 16" wide (400mm), the belt should be at least 2" (25mm) wider than the buckets.

Proper Pulley Face Width

For belts up to 12" (300mm) wide, the pulley face width should be at least 1" (25mm) wider than the belt.

For belts greater than 12" (25mm) wide, the pulley face width should be at least 2" (50mm) wider than the belt.

Head Pulley Lagging

The installation of high quality rubber lagging is recommended to provide the highest coefficient of friction between the belt and the pulley, thereby maximizing the driving force and eliminating belt slippage. Lagging also aids in cushioning the impact of the buckets on the head pulley.

Type	N/MM	Plies	Covers	Oil & Fat Resistant	Belt Thickness
4000/3	400	3	1+1	Limited	ca. 5mm
4000/4	400	3	2+2	Yes	ca. 7mm
500/4	500	4	1+1	Limited	ca. 6mm
500/4	500	4	2+2	Yes	ca. 8mm
630/4	630	4	1+1	Limited	ca. 7mm
630/4	630	4	1+1	Yes	ca. 7mm
630/4	630	4	2+2	Yes	ca. 9mm
800/5	800	5	1+1	Limited	ca. 8mm
800/5	800	5	1+1	Yes	ca. 8mm
800/5	800	5	2+2	Yes	ca.10mm
1000/5	1000	5	1+1	Limited	ca.8mm
1000/5	1000	5	1+1	Yes	ca.8mm
1000/5	1000	5	2+2	Yes	ca.10mm

* fields are mandatory

ENQUIRY FORM

Contact Information
Contact Person *
Company Name
Address *
Country *
Email ID *
Phone Number *
Fax
Enquiry Details
Enquiry For *
Details *