Neelkanth Rubber Mills


Rough Top Rubber Conveyor Belts


Rough Top Rubber Conveyor Belts

Our company is a well-known Manufacturer, Exporter and Supplier of Rough Top Rubber Conveyor Belts. They are used for transporting light weight goods, either being inclined or being horizontal. Also, they are suitable for transporting fragile or deformed materials and packed goods at an angle from 15 to 35 degree. Our Rough Top Rubber Conveyor Belts makes less friction coefficient making it ideal for running over table and flat panel. They are non-toxic and odorless in nature. Further, we provide Rough Top Rubber Conveyor Belts at very feasible prices.

Construction and Properties
2or3-Ply construction with cut edges and a carcass of synthetic EP fabric. The surface texture resists the tendency for the material to roll back down the conveyor. The black top cover is recommended for utility type incline service while the tan cover is suggested for transporting packaged food products where an odorless , non-toxic , non- marking belt is a necessity. Top cover is a full 1/8* thick SBR and the back is protected by either a durable friction surface bottom or a synthetic bare-back for slider bed applicatons.


Our R.T. Belt Standard Specification

Type No. of Ply Top Cover Bottom Cover Standard Length Color Standard Width
A 2 Ply 1/8'R.T. Bare Back

200mm

Per Roll

Black or Tan

1350mm

-

1500mm

Cut Edge

B 2 Ply 1/8'R.T. 1/16'
C 3 Ply 1/8'R.T. Bare Back
D 3 Ply 1/8'R.T. 1/16'